1. |
|
Select a safe and suitable location
in the car to attach a magnetic Mobile Phone holder.
|
2. |
|
Clean both the back of your mobile
phone and the surface where the magnet holder will
be attached, with the provided cleaner. Wait until
completely dry before attaching.
|
3. |
|
Attach a metal sticker on the back
of your Mobile Phone.
|
4. |
|
Attach the magnet holder in the car
where you want to locate your Mobile Phone. (Recommended
to safely put 3M sticker over the flame of portable
gas lighter for 3~5 seconds to make a stronger
adhesion) |
5. |
|
Install the ModooFree
SE on the existing
mirror by using the adjustable spring-loaded clips
on ModooFree SE's back.
|
6. |
|
Clip Microphone to the
sun visor. Install Microphone as close to the driver
as possible, in a place with as little wind noise
or air movement as possible, for clearer sound.
|
7. |
|
Plug in both PWR Jack (1) and PHONE
Jack (2) on the upper right side of ModooFree SE. |
8. |
|
Plug in D.C power cable from ModooFree
SE to the cigarette lighter.
|
9. |
|
Plug Hands Free Cable (or GSM Audio
Adaptor) to your Mobile Phone. Note: If your phone
does not have a 2.5mm earphone jack hole, be sure to
connect using a
GSM audio adaptor. Audio Adapter is optional
- Don't forget to purchase an audio adapter suitable for your Mobile
Phone,
from your ModooFree SE retailer. |
10. |
|
Fix and hide the cable around the windscreen
and under the dashboard by using the fixing clips provided.
Ask your retailer to assist you if you are having any
trouble. |
|
|
¡Ý
Caution while installation
1.
Install where it does not block the driver's view and
is in easy reach 2.
Install microphone where there are minimal wind
3.
Install microphone as close as possible facing towards
the driver's mouth 4.
Do not apply electric shock or stress to the product
5.
While placed in direct sun light in the summer, the
product might not function properly, so
wait for the product to cool off before usage. 6.
There will be no A/S for damage by dismantling or rebuilding
the product. |